Stitch Swap 2
- Sample 44
Sample by Donna Klemm
Sample by Donna Klemm
This design is from "Viking Lace, Insertions and Borders" From Country Stitches
Instructions
Row 1: E11
Row 2: Program E25 (mirrored side by side) > E25
Row 3: E11
|
Stitch Swap 2
- Sample 44
Sample by Donna Klemm |
|
|
Model:
1+ This design is from "Viking Lace, Insertions and Borders" From Country Stitches Instructions Row 1: E11 Row 2: Program E25 (mirrored side by side) > E25 Row 3: E11 |
|
| Fabric: Stabilizer: |
Cotton Poly
fabric Tear-away stabilizer |
|
Stitch Swap
2 - Sample 45
Created by Jean Dennison |
 |
| Instructions Step 1: Mark a centre ling on the length of your fabric with a pictogram pen or light pencil. Step 2: Use the "B" metal foot (it has a centre mark and a 3mm mark on either side of the centre mark) Step 3: When stitching out design, check your info display. If the stitch width is 6mm, the next row should be stitched at the 3mm mark (to the right or left of the centre mark on the "B" foot) lined up with the outside edges of the previously stitched row. Step 4: Stitch the row with the * first, then the row above and below the asterisk, and then the last rows Row 1: F39 Row 2: F13 *Row 3: F17* Row 4: F13 Row 5: F39 |
|
| Bobbin Thread Thread: Stabilizer Needle Material Setting |
Mettler
60/2 Sulky 40 wt Varigated green #2111 Stitch and Tear stabilizer Schmetz size 80/12 universal Woven Light |
 HATSWAP |
 HATS Contest |
 SewingRms |
 TipsNTricks |
 HomePage |
 4-Sale |
 FischlFAQ |
 |